What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
Do you find yourself in search of ideas about Hot Water Heater Repair?
Many modern-day homes make use of an electric water heater for their furnace, due to its ease as well as ease of use. Nonetheless, much like any other electric home appliances, problems might occur with its use, suddenly. It can be actually aggravating to awaken to a cold shower rather than a hot one or having your bathroom with water that isn't hot enough or perhaps as well warm. Whatever the situation might be, water heater troubles can be rather nerve-racking. Thankfully, we have actually made a checklist of possible services to your hot water heater issues. There are a variety of variables that could trigger many of these issues, maybe an issue with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety. Whatever the issue is, getting it taken care of must not posture too much of a concern if you follow these steps:
Check Your Power Supply:
As fundamental as this may appear, it is extremely essential. Without ample power, your hot water heater will not function. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the problem, just transform it on and off once more. Change any kind of busted or damaged fuse. Check the home appliance with power after these modifications to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power issue, then try having a look at your heating element if it is still working. Examine each of your burner to ensure the issue isn't with any of them. If any of them is damaged, change that component and afterwards check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you might need to check the temperature setups on your top thermostat. Make sure the circuit breaker is switched off before doing anything. Open up the accessibility panel as well as press the red button for temperature reset above the thermostat. This need to aid heat up the water. Turn the circuit breaker back on and also examine if the issue has been settled.
Call A Specialist:
If after changing all faulty components and also resetting your temperature, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert opinion. The trouble with your heating system could be that the hot and cold taps have actually been switched or it might be undersized for the quantity of hot water required in your house. Whatever the situation might be, a specialist plumber would help fix the issue.
Conclusion
Hot water heater issues are not always significant. A number of them result from minor issues like a blown fuse or damaged heating element. Changing the malfunctioning parts need to work. However, if you are still not able to solve the trouble, give a call to your closest plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a person who reads about How to Troubleshoot and Repair an Electric Water Heater, I imagined sharing that article post was a great idea. Are you aware of anybody else who is interested by the topic? Be sure share it. Thanks a lot for your time. Don't hesitate to stop by our blog back soon.
This Page
Report this page